MOTOSCAN 7.0

STANDARD SELECTION	PRODUCT CODE	DESCRIPTION	ราคา (บาท)
MOTOSCAN 7 STANDARD SELECTION	SINGLE MODE (Product code: MT007H MT007Y MT007S MT007PG)	MOTOSCAN 7H/ 7Y/ 7S Support for only 01 manufacturer: HONDA (MOTOSCAN 7H) YAMAHA (MOTOSCAN 7Y) SYM (MOTOSCAN 7S)	17,500
		MOTOSCAN 7PG Support for only 01 manufacturer: PIAGGIO/ VESPA	21,500
	DOUBLE MODE (Product code: MT007HY MT007HS)	MOTOSCAN 7HY/ 7HS Support for 02 manufacturers HONDA +YAMAHA (MOTOSCAN 7HY) HONDA + SYM (MOTOSCAN 7HS)	21,500
	MULTI MODE (Product code: MT007M)	MOTOSCAN 7M Support full function for 04 manufacturers: HONDA + YAMAHA + SYM + SUZUKI	24,500
	PRO MODE (Product code: MT007F)	MOTOSCAN 7 Support full function for 06 manufacturers: HONDA + YAMAHA + SYM + SUZUKI + PIAGGIO + KYMCO	32,500

ADVANCED OPTIONS	PRODUCT CODE	DESCRIPTION	PRICE (Baht)
MOTOSCAN 7 ADVANCED OPTION (All more options here are depending on customer’s option that without standard price list above)	MOTOBOX 2.0 (Product code: MT0006)	ADVANCED ACCESSORY FOR MOTOSCAN 7 Support many functions for MOTOSCAN 7: – Reprogram and upgrade firmware for ECM HONDA & PIAGGIO, VESPA – ODO value correction for HONDA, YAMAHA, SYM, PIAGGIO, VESPA… – Signal INPUT/ OUT ECU Simulator for diagnosis, test and repair ECU – Test fault inside ECU (this function need to buy more compatible cables) – Test Hall CKP sensors & IACV/ ISCV for HONDA, YAMAHA, PIAGGIO, VESPA (this function need to buy more compatible cables) – And more when update….	14,500
	MOTOBOX CABLE OPTION FOR ECU TEST FUNCTION	HONDA PACK 1 (for 02 motorcycles) Used to check ECU for LEAD 2009–2011 (ECU code: 38770-GGE-901), SCR 110 (ECU code: 38770-GFM-902)	1,850
		HONDA PACK 2 (for 03 motorcycles) Used to check ECU for LEAD 2012 (ECU code: 38770-GGE-941), AIR BLADE 2008 – 2010 (ECU code: 38770-KVG-V21), WINNER 2015-2018 (ECU code: 38770-K56-V01)	1,850
		HONDA PACK 3 (for 02 motorcycles) Used to check ECU for AIR BLADE 2011 – 2012 (ECU code: 38770-KVG-V41), VISION 2011-2012 (ECU code: 38770-KZL-E71)	1,850
		HONDA PACK 4 (for 04 motorcycles) Used to check ECU for FUTURE 125 (ECU code: 38770-KYZ-V21), WAVE RSX, WAVE 110, WAVE 125 (ECU code: 38770-K03-M01)	1,850
		HONDA PACK 5 (for 02 motorcycles) Used to check ECU for WAVE 110 RSX AT, WAVE 110 AT (ECU code: 38770-KWZ-841)	1,850
		HONDA PACK 6 (for 02 motorcycles) Used to check ECU for FUTURE NEO, FUTURE X (ECU code: 38770-KVL-932)	1,850
		YAMAHA PACK 7 (for 02 motorcycles) Used to check ECU for NOUVO SX (ECU code: 1DB-H591A-002XC-H591A-00), SIRIUS 2016 (ECU code: 1FC-H591A-11)	1,850
		YAMAHA PACK 8 (for 01 motorcycles) Used to check ECU for EXCITER 2018 (ECU code: 2ND-H591A-00)	1,850
		YAMAHA PACK 9 (for 01 motorcycles) Used to check ECU for JUPITER FI (ECU code: 2VP-H591A-00)	1,850
		YAMAHA PACK 10 (for 01 motorcycles) Used to check ECU for EXCITER 2019 (ECU code: 2ND-H591A-20)	1,850
	MOTOBOX CABLE OPTION FOR CKP, IACV/ISCV TEST FUNCTION	CKP & IACV PACK 11 Used to check Hall CKP sensor and IACV/ ISCV for all HONDA, YAMAHA, PIAGGIO/ VESPA	1,850
Notes: when buy the goods, customers can choice follow options and make total for payment. Example 1: MOTOSCAN 7 = $800 = totals of payment Example 2: MOTOSCAN 7 + MOTOBOX 2 + 03 add-in cables = $800 + $324 + ($45 X 3) = totals of payment

UPGRADE	VERSION	DESCRIPTION	PRICE (Baht)
UPGRADE TO MOTOSCAN 7 (Upgrade from old MOTOSCAN version to MOTOSCAN 7 Price do not include shipping)	6.2 6.3	Upgrade from MOTOSCAN 6.2 and 6.3 to MOTOSCAN 7 (included additional cable) + Update machine: Free + Additional cable: $35	1,450
	6.0 6.1	Upgrade from MOTOSCAN 6.0 and 6.1 to MOTOSCAN 7 (included additional cable)	2,450
	5.8	Upgrade from MOTOSCAN 5.8 to MOTOSCAN 7 (included additional cable)	5,450

A. FUNCTION 1: FIND MALFUNCTION

1.1. Read, clear fault codes stored in ECUs of engine system and ABS system 
1.2. Find complex faults that MIL lamp does not indicate include such as:
– Diagnose faults by the automatic data analyzing and interviewing the technicians
+ Can’t start engine
+ Down power when accelerate
+ Idling stop fault
+ Fuel consumption
+ Starter is not work
+ Random acceleration
+ Constant acceleration
+ Idling not work
+ Hard to start engine
+ Weak engine
+ Injector mechanical fault
+ Dirty Air filter*
+ Exhaust pipe block*
+ Air hole dirty/block of MAP sensor/Throttle*
+ Intake manifold leak*
– Diagnose faults by analyzing the engine live data and activate the actuators
+ Voltage and open angle of throttle position sensor (TPS)
+ Voltage and value of intake air temperature sensor (IAT)
+ Voltage and value of manifold air pressure sensor (MAP)
+ Voltage and value of engine temperature sensor (ECT)
+ Voltage and value of oxygen sensor (O2S)
+ Value of atmospheric pressure sensor
+ Engine speed (CKP/ NE)
+ Vehicle speed (VSS)
+ Front/rear wheel speed (with ABS system)
+ Status of fuel pump
+ Ignition timing advance (ISA)
+ Fuel injection time (Ti)
+ Starter signal (STP)
+ Status signal of side stand switch (SSTAND-SW)
+ Status Hall sensor
+ Evaporative purge cut solenoid valve output signal (PCS)
+ Output signal active starter relay (ON/OFF)
+ Output signal active PCV
+ Output signal active IACV
+ Output signal active MIL
+ SCS input signal status (service check signal)
+ Open state of step motor (IACV)
+ State of heater of O2 sensor
+ State of brake switch
+ State of Start & Stop indicate lamp
+ State of Star t& Stop mode button
+ State of start button
+ State of pre-positioning
+ Status of direction sensor
+ Status of oil minimum pressure sensor
+ Engine stop command from DSP
+ Battery voltage (BATT)
+ Battery current
+ Short term fuel trim in closed loop
+ Environmental revision coefficient in closed loop
+ Fault code and total fault codes
+ And other parameters vv…
– Activate and reset the actuators: Fuel pump, injector, ignition coil, IACV (ISCV), O2 heater, pump, blower, head lamp, MIL warning lamp, ABS warning lamp, Immobilizer lamp, Start&Stop lamp, engine oil pressure warning lamp, VVA valve, reset pre-positioning of crankshaft …B. FUNCTION 2: REPAIR FAULT2.1. Automatically program smart key for HONDA, YAMAHA, SUZUKI:
– Read all KEYID# and ECMID from vehicle SCU
– Program smart key directly with vehicle or without vehicle (SCU is not installed on vehicle) for cases:
+ Register more FOB# for all of cases
+ Register FOB# when lost all of the FOB#
+ Delete KEYID in SCU memory
+ Synchronize SCU & ECM for all of cases
+ Inactivate FOB# code in SCU when lost FOB#
+ Check FOB# & SCU
+ Display status of KEY (ON/OFF)
+ Display SCU information
– Restore SCU data from sample data for HONDA (this function used to repair software inside SCU when SCU data is fault)
– Copy data from source SCU to destination SCU for all motorbikes that have Smart key system: HONDA, YAMAHA, SUZUKI (This function used to repair, swap SCU when have SCU hardware/software fault)
– Quick sync SCU & ECM (without FOB) for HONDA: SH, PCX, X-ADV… and equivalent vehicles
List of vehicle as below (include other models which use similar ECMS):
– HONDA: SH 125/150/125D/150D/SM, SH 300i ABS, PCX, SH MODE , LEAD, AIR BLADE, VISION, X-ADV, FORZA, SUPER CUB, SCOOPY ESP, X-ADV, CLICK, VARIO
– YAMAHA: JANUS 125, NVX 125, NVX 155 Camo, NVX 155 ABS, AEROX, LEXI S, NMX, NMAX, SMAX, TMAX, QBIX 125, QBIX 125 S, QBIX 125 ABS
– SUZUKI: GSX R1502.2. Programming key immobilizer and get out immobilizer ID code for PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs) that ECM types: ACII, AC2I, AC5I, AC8I, AC13I, AC13I, AC191, AC19I, AC20I, AC21I, AC23I, AC24I, AC25I, AC27I, AC32I, AC5I, AC8I, ACI600, AC601, ACI602, ACI603, ACI604, ACI605, ACI606, ACII, MIU1, MIU2, MIU G3/RIU1, MIU4, PGN04/PGS02/PGT01, PGU09* , PGT10* and PGQ16*
Note: The functions with an asterisk (*) will appear on the next versionReset immobilizer, register new key when lost all of the keys, register additional keys … by many methods (KEY to IMMO. or IMMO. to KEY)2.3. Correct and adjust value of digital odometer (use with MOTOBOX)
– HONDA: AIR BLADE (2013-2019), AIR BLADE 2020, CBR 250, FUTURE NEO Fi, FUTURE X Fi, LEAD (2013-2019), LEAD 2020, PCX (2008-2013), PCX (2014-2017), PCX 2018, PCX HYBRID, SH 300i, SH MODE (2013-2019), SH 125/150/125D/150D/SM (2013-2017), SH 125/150/125D/150D/SM (2018-2019), SH 125/150/125D/150D/SM (2020), SCOOPY, MSX, VARIO 150, WINNER, WINNER X, X-ADV, DYLAN, ZOOMER X (2013-2017), ZOOMER X (2018-2020), SONIC, WAVE 125 (Thái Lan), CLICK (2012-2014), CLICK (2014-2017) CLICK (2018-2020), VARIO (2014-2017), VARIO (2018-2020)
– YAMAHA: AEROX, LEXI S, LATTE, FREGO, NVX, NMAX, NMX, JANUS, TFX, EXCITER (2014-2018), EXCITER (2019-2020), ACRUZO, , FZ 150, FZ 150i, GRANDE, NOUVO SX, NOUVO LX, YZF-R3, R15
– PIAGGIO: Medly 125, Medly 150, Medly 125 ABS, Medly 150 ABS, Liberty ABS, Liberty 125 3V PGN04, Liberty 150 3V PGN04, Liberty 125 3V PGT01, Liberty 150 3V PGT01, Liberty 125 3V PGS02, Liberty 150 3V PGS02, Liberty ABS PGS06
– VESPA: Primave 125 PGN04, Primave 150 PGN04, Sprint 125 3V PGN04, Sprint 150 3V PGN04, Sprint 125 3V PGT01, Sprint 150 3V PGT01, Sprint 125 3V PGS02, Sprint 150 3V PGS022.4. Reprogram and upgrade ECM firmware (firmware) (use with MOTOBOX) for:
– HONDA: AIR BLADE 125, LEAD 125, SH MODE, VISION 110, VISION ESP*
– PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs): ECM types are AC19I/AC20I/AC24I/AC25I/ AC27I/AC32I, MIU G3/RIU1 and ECM PGN04/PGS02/PGT01 and PGQ16*
– YAMAHA: NVX*
Note: The functions with an asterisk (*) will appear on the next version
Initialize and repair data errors, upgrade the versions of MCU, EEPROM

2.5. Calibrate and set control parameters in the ECM:
– Calibrate air/fuel ratio (AFR): YAMAHA, PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs), SYM
– Reset to manufacturer value of ECM: HONDA, YAMAHA, PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs)
– Offset zero point value and set range of throttle position sensor for PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs)
– Reset IACV: HONDA, YAMAHA, PIAGGIO/VESPA (it also support GILERA, APRILIA, DERBI, PEUGEOT, which use similar ECMs), KYMCO
– Adjust pulse band width to control fuel injectors (Ti) and idle speed: YAMAHA, SYM
– Create new and repair data errors, upgrade the version MCU, EEPROM
– Set altitude mode for some models of YAMAHA

2.6 Check component fault inside ECM (this is optional and use with MOTOBOX)
Test quantity of ECMs for HONDA, YAMAHA, PIAGGIO/VESPA according to the order

2.7 Simulate Input/Output signal of ECU to support diagnosing fault and repair ECU hardware (use with MOTOBOX)

C. FUNCTION 3: SPECIALIZED MEASURE TOOL

3.1 Fast measure and assess capacity, quality of battery
3.2 Reviewed charging status and rated the quality of the generator, regulator
3.3 Measure the air/fuel ratio (A/F) to assess the instantaneous fuel consumption
3.4 Measure engine speed (RPM) for all carburetor and PGM-FI/FI with DIY ECU motorbikes
3.5 Emulate the signals on motorbike for fault diagnosis, ECU hardware repair**

D. FUNCTION 4: INFORMATION

4.1 Show the current firmware version of ECM and ACU
4.2 Look up the acronym, position of signal pins for systems: ECM, SCU, ACU, ODO, IMMO, SMART KEY
4.3 Look up electrical wiring diagram: principle diagram, schematic assembly and specified conditions
4.4 Look up the process assembly, repair, maintenance mechanic, oil warning lamp reset
4.5 Manage repair workshop: customer, financial, store, treasury, employees
4.6 Update version of data software and firmware via Internet

The advanced functions with an asterisk (*), will appear on the next version
The advanced functions with an asterisk (**), you must purchase additional MOTOBOX

Function table for motorbikes:

● ADDRESS & APPLICATION RANGE

– Diagnostic scanner in motorbike repairing workshop and equipment and trainers for technical vocation training
– A semi-finished products connect to trainer for electronic injection & ignition system of PGM-FI motorbikes
– MOTOSCAN used to read, clear fault codes, show live data, active actuators, repair firmware and immobilizer, lookup content of fault codes, suggesting repair for most small motorbikes of PIAGGIO, HONDA, YAMAHA, SUZUKI, SYM, KYMCO manufacturers use PGM-FI/FI system such as:
Notes: Models of motorbikes can vary according to country, models type don’t have as below can connect to MOTOSCAN if have same ECM.

● ADVANTAGE
– In-depth features, application range compatible most small motorbikes and scooters in Asia market
– A safe and convenient solution support CAN bus and K-Line protocol
– Simple operation with keypad direct on handhelds (without computer)
– Equipment has integrate compact, design beautiful, professional, high strength mechanics
– Effective, fast, accurate, reliable, detailed
– Lookup more detail information for repairs by the MOTODATA
– Technical support consultant directly from manufacturer by SMS thought the Skype, Yahoo, WhatsApp, Zalo, Email, Teamviewer
– Update via Internet
– 12 months warranty and maintenance as required
– Low price

MOTOSCAN information	List of vehicle	List of vehicle
Function table	List of system	List of system
Function table	Function table	Function table
Test ECU	Test battery	Program smart key
Program smart key	Program smart key	Program smart key
Read fault code	Active actuator	ECM information
Live data	A/F ratio	Adjust ODO

● EQUIPMENT COMPONENT
– 01 Handheld with LCD and function control buttons
– 01 Data cable used to determine faults (K-line communication protocol)
– 01 Data cable for YAMAHA (CAN Bus communication protocol)
– 01 Cable receiver signal and optical sensor
– 01 Cable check battery and generator
– 02 Cables program HONDA smart key
– 01 Cable program YAMAHA/SUZUKI smart key
– 01 12V/DC Power cable
– 01 220V/AC to 12V/DC power converter
– 01 Extendable cable for Yamaha
– 01 MOTOBOX electrical accessory (an optional only and isn’t included of standard pack)
– 01 RPM cable used to measure engine speed (RPM) without OBD (an optional only and isn’t included of standard pack)
– 01 MT0006 LINK – data cable (an optional only and isn’t included of standard pack)
– 01 Accessory measure exhaust (an optional only and isn’t included of standard pack)
– 01 Update cable
– 01 CD video use guide and free MOTODATA
– 01 Guide book
– 01 Hand cloth bag

● DLC LOCATION ON THE VEHICLES & WIRING CONNECTION DIAGRAM

1. CONNECTING DLC ON THE VEHICLES
(This connection used for read/clear fault code, reset ECM, show live data and actuators)

K: K-line; E: Negative battery; B: Positive Battery

a. PIAGGIO:

b. HONDA:
– Type 1:

– Type 2:

c. SYM:

d. YAMAHA:
– Type 1:

– Type 2:

Step 1: Disconnect the connector between dashboard and ECU
Step 2: Connect the K wiring of cable to ECU diagnose connector

– Type 3:

e. KYMCO

f. SUZUKI

2. CONNECTING WIRE ON SPECIAL FUNCIONS
(Check battey, generator)

3. CONNECTION DIAGRAM WITH MOTOBOX

● SOME VIDEO CLIPS SUPPORT USER IN CHECKING & REPAIRING

– Click here to view clip for adjusting A/F ratio, repair excessive fuel consumption fault by ECM 
– Click here to view clip for loading user data for ECM (user self-modifies the data file) 
– Click here to view clip for programming Smart key of HONDA VISION 2021 when lost all of keys 

– Click here to view clip for adjusting A/F, Tuning and reprogarmming ECU

– Click here to view clip for testing IACV/ ISCV valve

– Click here to view clip for testing Hall sensor

– Click here to view clip for testing components fault in ECM (ECU tester)

– Click here to view clip for ECU tester functio

– Program Smart key and connect YAMAHA, SUZUKI

– Click here to view clip for new functions on MOTOSCAN 6.3

– Click here to view clip for connecting MOTOSCAN 6.3 to YAMAHA EXCITER 2019

– Click here to view clip for smart key programming of HONDA motorbike on MOTOSCAN 6.2

– Click here to view clip for MOTOSCAN 6 on VTV2, Vietnam Television

– Click here to view clip for smart key programming of YAMAHA (lost all keys)

– Click here to view clip for odometer correction of HONDA Vario

– Click here to view clip for direct RPM measurement from high-tension lead

– Click here to view clip for determining fault by camera on smart phone (Android operating system)

– Click here to view clip for determining ABS system fault of HONDA motorbike

– Click here to view clip for smart key programming of HONDA motorbike

– Click here to view clip for odometer correction of motorbike

– Click here to view clip for drop-down power when sudden acceleration

– Click here to view clip for connecting MOTOSCAN to PIAGGIO Medley

– Click here to view clip for connecting MOTOSCAN to YAMAHA NVX 155cc

– Click here to view clip for programming key of PIAGGIO/VESPA (ECM types are PGN04, PGS02, MIUG3)

– Click here to view clip for programming key of PIAGGIO/VESPA (ECM types arre AC19I, AC20I)

– Click here to view clip for upgrading firmware of HONDA VISION

– Click here to view clip for upgrade firmware in IC, ECM of PIAGGIO/VESPA

– Click here to view clip for signal simulating (Part 3)

– CClick here to view clip for signal simulating (Part 2)

– Click here to view clip for signal simulating (Part 1)

– Click here to view clip for advanced fault diagnosing of YAMAHA motorbike

– Click here to view clip for checking injector mechanical

– Click here to view clip for activating head lamp of YAMAHA

– Click here to view clip for diagnosing fault position on electronic wiring diagram

– Click here to view clip for diagnosing complex fault that MIL lamp does not indicate

– Click here to view clip for adjusting odometer

– Click here to view clip for functions & application range of MOTOSCAN

– Click here to view clip for checking fuel pressure & compression pressure of cylinders

– Click here to view clip for checking Air/Fuel ratio

– Click here to view clip for reading fault codes

– Click here to view clip for checking intake air temperature sensor

– Click here to view clip for checking engine coolant temperature sensor

– Click here to view clip for checking throttle position sensor

– Click here to view clip for studying live data

– Click here to view clip for actuator activation

– Click here to view clip for adjusting Air/Fuel ratio

– Click here to view clip for checking battery, generator, charger

– Click here to view clip connect MOTOSCAN to YAMAHA motorbike

– Click here to view clip erasing fault code & reset ECU/ECM

– Click here to view clip lookup fault code

– Click here to view clip for reading fault code by MIL